Development and Characterization of HDPE Waste/Ramie Fiber Composites for Geomembrane Applications in Litopenaeus vannamei Shrimp Cultivation
Abstract
Geomembranes are thin geosynthetic materials composed of polymeric layers that function as barriers in direct contact with soil. The properties of HDPE geomembranes suitable for application as vannamei shrimp (Litopenaeus vannamei) aquaculture. HDPE geomembranes applied in vannamei shrimp aquaculture are subjected to thermal loads (UV radiation), oxidative agents, and mechanical force such as interfacial friction and tensile loading in surface wear. This study aims to improve the mechanical properties of the material by incorporating natural fibers as reinforcement into HDPE–ramie fiber biocomposite. The process of making HDPE–ramie fiber biocomposite uses an single screw extruder with a temperature of 170 oC, a rotation of 20 rpm with a ratio of HDPE waste and ramie fiber of 97.5:2.5, 95:5, and 92.5:7.5. The results of tensile and impact tests show the highest strength and toughness are shown in the HDPE sample and ramie fiber 92.5:7.5 with a value of 5.23 MPa and 96.17 kJ/m2. The highest material ductility was demonstrated in the HDPE and ramie fiber composite 97.5:2.5 with a value of 1.32%. In addition, the highest stiffness was demonstrated in the HDPE and ramie fiber composite 95:5 with a value of 845.40 MPa. The results of the morphological investigation showed that the bond between the matrix and filler was partially formed and the smallest fiber diameter was 4 µm.
Keywords: HDPE, Ramie, Composite, Geomembrane, VanameiFull Text:
Full text PDFReferences
W. Cen, L. Wang, X. Sheng, and J. Yan, “Leakage behavior of defective geomembrane on different underliners: Experimental and modeling studies,” KSCE Journal of Civil Engineering, vol. 29, no. 5, May 2025.
S.L. Vorlet and G. De Cesare, “A comprehensive review on geomembrane systems application in hydropower,” Renewable and Sustainable Energy Reviews, vol. 189, p. 113591, Jan. 2024.
M. Attique, W. Hassan, B. Alshameri, S. Ghani, M. Junaid, F. Iqbal, J. Hassan, “Soil- Geomembrane interfaces performance under monotonic temperature cycles: implications for infrastructure durability,” Results in Engineering, vol. 28, Dec. 2025.
G.J. Fowmes, C.A. Zaharescu, Z. Chao, and A. Mousa, “Quantification of shear-induced wear development on textured geomembrane-geotextile interfaces,” Geotextiles and Geomembranes, vol. 54, no. 2, pp. 249–262, Apr. 2026.
P. Schneider, F. Li, and S. Babu, “Comparative analysis of asphalt and geomembrane sealing systems for sustainable uranium pile remediation: Insights from hydrological modeling under climate change,” Journal of Hazardous Materials, vol. 496, Sep. 2025.
W. Cen, L. Wang, X. Sheng, and J. Yan, “Leakage behavior of defective geomembrane on different underliners: Experimental and modeling studies,” KSCE Journal of Civil Engineering, vol. 29, no. 5, May 2025.
X. Xiang, A. Bouazza, and E. Mikhael, “Evaluating the hypothesis of per- and polyfluoroalkyl substances (PFAS) presence in HDPE geomembranes,” Journal of Hazardous Materials Advances, vol. 18, May 2025.
F.L. Lavoie, M. Kobelnik, C.A. Valentin, M.dL. Lopes, E.M. Palmeira, and J.L. da Silva, “Service life of some HDPE geomembranes,” Case Studies in Construction Materials, vol. 18, Jul. 2023.
F.L. Lavoie, M. Kobelnik, C.A. Valentin, J.L. da Silva, and M.dL. Lopes, “Study of an exhumed HDPE geomembrane used in an industrial water pond: Physical and thermoanalytical characterisations,” Results in Materials, vol. 8, Dec. 2020.
S.B. Kabir, A. Bouazza, and M. Faizal, “Modifying ASTM E96 to assess water vapour transmission rates of geomembranes at high temperatures,” Geotextiles and Geomembranes, vol. 52, no. 5, pp. 1054–1058, Oct. 2024.
H. Tahir, G. Stoltz, G. Veylon, and L. Peyras, “Impact of test speed on the thermo-mechanical behavior of various types of geomembranes,” Geotextiles and Geomembranes, vol. 53, no. 6, pp. 1588–1599, Dec. 2025.
R.A. e Silva, F.B. Abdelaal, and R.K. Rowe, “A 9-year study of the degradation of a HDPE geomembrane liner used in different high pH mining applications,” Geotextiles and Geomembranes, vol. 53, no. 1, pp. 230–246, Feb. 2025.
F.L. Lavoie, M. Kobelnik, C.A. Valentin, M. dL. Lopes, J. Lins da Silva, and E.M. Palmeira, “Study of heat and UV radiation exposures on HDPE geomembranes,” Results in Materials, vol. 22, Jun. 2024.
J.M. Pacheco-Vega, M.A. Cadena-Roa, J.A. Leyva-Flores, O.I. Zavala-Leal, E. Pérez-Bravo, and J.M.J. Ruiz-Velazco, “Effect of isolated bacteria and microalgae on the biofloc characteristics in the Pacific white shrimp culture,” Aquaculture Reports, vol. 11, pp. 24–30, Aug. 2018.
R. Coyle, G. Hardiman, and K.O. Driscoll, “Microplastics in the marine environment: A review of their sources, distribution processes, uptake and exchange in ecosystems,” Case Studies in Chemical and Environmental Engineering, vol. 2, Sep. 2020.
P. Su, J. Chang, F. Yu, X. Wu, and G. Ji, “Microplastics in aquaculture environments: Sources, pollution status, toxicity and potential as substrates for nitrogen-cycling microbiota,” Agricultural Water Management, vol. 304, p. 109090, Nov. 2024.
L. Zhu, C. Xie, L. Chen, X. Dai, Y. Zhou, H. Pan, K. Tian., “Transport of microplastics in the body and interaction with biological barriers, and controlling of microplastics pollution,” Ecotoxicology and Environmental Safety, vol. 255, p. 114818, Apr. 2023.
A.J.P. Nunes, L.L. Dalen, G. Leonardi, and L. Burri, “Developing sustainable, cost-effective and high-performance shrimp feed formulations containing low fish meal levels,” Aquaculture Reports, vol. 27, p. 101422, Dec. 2022.
F.L. Lavoie, M. Kobelnik, C.A. Valentin, É.F. da Silva Tirelli, M.dL. Lopes, and J.L. da Silva, “Evaluation of exhumed HDPE geomembranes used as a liner in Brazilian shrimp farming ponds,” Case Studies in Construction Materials, vol. 16, Jun. 2022.
A. Lekrine, A. Belaadi, I. Dembri, M. Jawaid, A.S. Ismail, and D. Ghernaout, “Fiber treatment impact on the thermal behavior of biomass/palm-fibers polylactic-acid hybrid biocomposites,” Materials Chemistry and Physics, vol. 338, Jul. 2025.
W.D. Callister Jr. and D.G. RethWistch, Material Science and Engineering an Introduction, 10th ed. 2017.
M. Asrofi, M.O.P. Hastu, M.L. Al Anshori, F.I.H. Putra, R.R. Pradiza, H. Setyawan, M. Yusuf, M. Siswanto, R.A. Ilyas, M.A.M. Rizal, S.M. Sapuan, V.F. Knight, M.N.F. Norrahim, “The Effect of Alkalization Fiber on Mechanical, Microstructure, and Thermal Properties of Sugarcane Bagasse Fiber Reinforced PLA Biocomposite,” Journal of Renewable Materials, vol. 13, no. 10, pp. 1979–1992, 2025.
A. Soni, D. Veeman, and J.K. Katiyar, “Effect of raster angles on mechanical properties and failure analysis of 3D printed Tamarindus Indica seed powder/ Polylactic acid (PLA) biocomposites,” Materials Today Communications, p. 114809, Feb. 2026.
T. Vakiti, R.R.P. Kuppusamy, S.R. Shukla, and V. Gudipadu, “Effect of alkaline treatment and weathering on the mechanical properties, failure mechanisms and service life of jute, hemp, and sisal fiber-reinforced epoxy biocomposites,” Materials Today Communications, vol. 51, Feb. 2026.
R.E. Njoku, A.E. Okon, and T.C. Ikpaki, “Effect of Variation of Particle Size and Weight Fraction on The Tensile Strength and Modulus of Periwingkle Shell Reinforced Polyester Composite.” Nigerian Journal of Technology, vol. 30, No. 2, pp. 87-99, June 2011.
A.F. Fikri, “Pemodelan Tegangan dan Regangan pada Bone Plate dengan Menggunakan Material Stainless Steel 316 L,” Indonesian Journal of Multidisciplinary on Social and Technology, vol. 1, no. 3, pp. 265–269, Jul. 2023.
T. Suparanon, K. Banjong, N. Phusunti, and W. Phetwarotai, “Upcycling spent coffee grounds as a sustainable additive for superior impact-resistant and flame-retardant polylactide biocomposite films,” Industrial Crops and Products, vol. 240, Feb. 2026.
M. Parvan, V. S. Parihar, M. Kellomäki, M. Mahato, and R. Layek, “Tailoring of crystal size and significant enhancement of physical property, ductility and toughness in in-situ nano kraft lignin/nano-fibrillated cellulose biocomposite,” Composites Part B: Engineering, vol. 298, Jun. 2025.
E. Jungstedt, S. Östlund, and L. A. Berglund, “Transverse fracture toughness of transparent wood biocomposites by FEM updating with cohesive zone fracture modeling,” Composites Science and Technology, vol. 225, Jul. 2022.
N.S. Suharty, H. Ismail, K. Diharjo, D.S. Handayani, and M. Firdaus, “Effect of Kenaf Fiber as a Reinforcement on the Tensile, Flexural Strength and Impact Toughness Properties of Recycled Polypropylene/ Halloysite Composites,” Procedia Chemistry, vol. 19, pp. 253–258, 2016.
M. Ichwan, A.J. Onyianta, R.S. Trask, A. Etale, and S.J. Eichhorn, “Production and characterization of cellulose nanocrystals of different allomorphs from oil palm empty fruit bunches for enhancing composite interlaminar fracture toughness,” Carbohydrate Polymer Technologies and Applications, vol. 5, Jun. 2023.
M.M. Reza, H.A. Begum, and A.J. Uddin, “Potentiality of sustainable corn starch-based biocomposites reinforced with cotton filter waste of spinning mill,” Heliyon, vol. 9, no. 5, May 2023.
F. Kundie, C.H. Azhari, A. Muchtar, and Z.A. Ahmad, “Effects of filler size on the mechanical properties of polymer-filled dental composites: A review of recent developments,” Journal of Physical Science, vol. 29, no. 1, pp. 141–165, 2018.
A. Lekrine, A. Belaadi, I. Dembri, M. Jawaid, A.S. Ismail, and D. Ghernaout, “Fiber treatment impact on the thermal behavior of biomass/palm-fibers polylactic-acid hybrid biocomposites,” Materials Chemistry and Physics, vol. 338, July 2025.
DOI: http://dx.doi.org/10.24845/ijfac.v11.i1.10
Refbacks
- There are currently no refbacks.
Editorial Office:
Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Sriwijaya
Jl. Palembang-Prabumulih Km.35 Indralaya Ogan Ilir Sumatera Selatan 30662
IJFAC by Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Sriwijaya is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License