Isotherm and Thermodynamics Study of Congo Red and Procion Red Adsorption over Natural and Zn/Fe Pillared Bentonite

Desnelli Desnelli, Heni Yohandini, Elisa Nurnawaty, Poedji Loekitowati Hariani

Abstract


The effect of initial Congo Red and Procion Red concentration on isotherm adsorption and thermodynamic adsorption study using natural and Zn/Fe Pillared bentonite have been conducted. The adsorbents were also characterized by Fourier transform infrared (FTIR), X-Ray Diffraction (XRD), and Scanning electron microscope-energy dispersive X-Ray analysis (SEM-EDX). The study showed that the optimum dye removal of Congo Red and Procion Red was obtained at the initial dye concentration of 80 mg/L. The adsorption isotherm study showed that the Congo Red and Procion Red adsorption on natural and Zn/Fe Pillared bentonite followed the Freundlich isotherm model. The adsorption thermodynamics study showed that the adsorption of Congo Red and Procion Red occurred endothermically, wheraas the positive value of entropy indicated a high level of disorder of adsorption for both dyes. Furthermore, the FTIR, XRD, and SEM-EDX analysis showed that the pillarization of Zn/Fe on bentonite successfully well occurred, and it could be concluded that the adsorption of Congo Red using natural and Zn/Fe pillared bentonite showed a better adsorption process than Procion Red.

Full Text:

Full Text PDF

References


Rahman, T. Urabe, and N. Kishimoto, “Color removal of reactive procion dyes by clay adsorbents,” Procedia Environ. Sci., vol. 17, pp. 270–278, 2013, doi: 10.1016/j.proenv.2013.02.038.

J. Georgin, B. D. S. Marques, J. D. S. Salla, E. L. Foletto, D. Allasia, and G. L. Dotto, “Removal of procion red dye from colored effluents using H2SO4-/HNO3-treated avocado shells (Persea americana) as adsorbent,” Environ. Sci. Pollut. Res., vol. 25, no. 7, pp. 6429–6442, 2018, doi: 10.1007/s11356-017-0975-1.

J. O. Amode, J. H. Santos, Z. Md. Alam, A. H. Mirza, and C. C. Mei, “Adsorption of methylene blue from aqueous solution using untreated and treated (Metroxylon spp.) waste adsorbent: equilibrium and kinetics studies,” Int. J. Ind. Chem., vol. 7, no. 3, pp. 333–345, 2016, doi: 10.1007/s40090-016-0085-9.

S. Jayanthi, N. Krishnarao Eswar, S. A. Singh, K. Chatterjee, G. Madras, and A. K. Sood, “Macroporous three-dimensional graphene oxide foams for dye adsorption and antibacterial applications,” RSC Adv., vol. 6, no. 2, pp. 1231–1242, 2016, doi: 10.1039/c5ra19925e.

F. Ayari, G. Manai, S. Khelifi, and M. Trabelsi-Ayadi, “Treatment of anionic dye aqueous solution using Ti, HDTMA and Al/Fe pillared bentonite. Essay to regenerate the adsorbent,” J. Saudi Chem. Soc., vol. 23, no. 3, pp. 294–306, 2019, doi: 10.1016/j.jscs.2018.08.001.

E. Fosso-Kankeu, F. Waanders, and C. L. Fourie, “Adsorption of congo red by surfactant-impregnated bentonite clay,” Desalin. Water Treat., vol. 57, no. 57, pp. 27663–27671, 2016, doi: 10.1080/19443994.2016.1177599.

S. Khelifi, F. Ayari, A. Choukchou-Braham, and D. Ben Hassan Chehimi, “The remarkable effect of Al–Fe pillaring on the adsorption and catalytic activity of natural Tunisian bentonite in the degradation of azo dye,” J. Porous Mater., vol. 25, no. 3, pp. 885–896, 2018, doi: 10.1007/s10934-017-0500-4.

A. Kadeche, A. Ramdani, M. Adjdir, A. Guendouzi, S. Taleb, M. Kaid, and A. Derantani, “Preparation, characterization and application of Fe-pillared bentonite to the removal of Coomassie blue dye from aqueous solutions,” Res. Chem. Intermed., vol. 46, no. 11, pp. 4985–5008, 2020, doi: 10.1007/s11164-020-04236-2.

M. N. Zafar, Q. Dar, F. Nawaz, M. N. Zafar, M. Iqbal, and M. F. Nazar, “Effective adsorptive removal of azo dyes over spherical ZnO nanoparticles,” J. Mater. Res. Technol., vol. 8, no. 1, pp. 713–725, 2019, doi: 10.1016/j.jmrt.2018.06.002.

P. K. Ngoc, T. K. Mac, H. T. Nguyen, D. T. Viet, T. D. Thanh, P. V. Vinh, B. T. Phan, A. T. Duong, and R. Das, “Excellent organic dye adsorption capacity and recyclability of hydrothermally synthesized α-Fe2O3 nanoplates and nanorices,” J. Sci. Adv. Mater. Devices, vol. 6, no. 2, pp. 245–253, 2021, doi: 10.1016/j.jsamd.2021.02.006.

S. I. Siddiqui and S. A. Chaudhry, “Iron oxide and its modified forms as an adsorbent for arsenic removal: A comprehensive recent advancement,” Process Saf. Environ. Prot., vol. 111, pp. 592–626, 2017, doi: 10.1016/j.psep.2017.08.009.

D. Desnelli, W. R. Asri, Hasanudin, M. Said, and P. L. Hariani, “Removal of congo red and procion red using Zn/Fe pillared bentonite,” IOP Conf. Series: Earth and Environmental Science, 2021, vol. 926, p. 012051, doi: 10.1088/1755-1315/926/1/012051.

L. G. Yan, L. L. Qin, H. Q. Yu, S. Li, R. R. Shan, and B. Du, “Adsorption of acid dyes from aqueous solution by CTMAB modified bentonite: Kinetic and isotherm modeling,” J. Mol. Liq., vol. 211, pp. 1074–1081, 2015, doi: 10.1016/j.molliq.2015.08.032.

M. Toor, B. Jin, S. Dai, and V. Vimonses, “Activating natural bentonite as a cost-effective adsorbent for removal of Congo-red in wastewater,” J. Ind. Eng. Chem., vol. 21, pp. 653–661, 2015, doi: 10.1016/j.jiec.2014.03.033.

B. B. Pajarito, K. C. Castañeda, S. D. M. Jeresano, and D. A. N. Repoquit, “Reduction of offensive odor from natural rubber using zinc-modified bentonite,” Adv. Mater. Sci. Eng., vol. 2018, 2018, doi: 10.1155/2018/9102825.

M. Sangeeta, K. V. Karthik, R. Ravishankar, K. S. Anantharaju, H. Nagabhushana, K. Jeetendra, Y. S. Vidya and L. Renuka, “Synthesis of ZnO, MgO and ZnO/MgO by Solution Combustion Method: Characterization and Photocatalytic Studies,” Mater. Today Proc., vol. 4, no. 11, pp. 11791–11798, 2017, doi: 10.1016/j.matpr.2017.09.096.

R. S. Hebbar, A. M. Isloor, B. Prabhu, Inamuddin, A. M. Asiri, and A. F. Ismail, “Removal of metal ions and humic acids through polyetherimide membrane with grafted bentonite clay,” Sci. Rep., vol. 8, no. 1, pp. 1–17, 2018, doi: 10.1038/s41598-018-22837-1.

Z. Huang, Y. Li, W. Chen, J. Shi, N. Zhang, X. Wang, Z. Li, L. Gao and Y. Zhang, “Modified bentonite adsorption of organic pollutants of dye wastewater,” Mater. Chem. Phys., vol. 202, pp. 266–276, 2017, doi: 10.1016/j.matchemphys.2017.09.028.

S. Lubis, Sheilatina, and Murisna, “Synthesis, characterization and photocatalytic activity of α-Fe2O3/bentonite composite prepared by mechanical milling,” J. Phys. Conf. Ser., vol. 1116, no. 4, 2018, doi: 10.1088/1742-6596/1116/4/042016.

S. Mustapha, J. O. Tijani, M. M. Ndamitso, S. A. Abdulkareem, D. T. Shuaib, A. K. Mohammed and A. Sumaila, “The role of kaolin and kaolin/ZnO nanoadsorbents in adsorption studies for tannery wastewater treatment,” Sci. Rep., vol. 10, no. 1, pp. 1–22, 2020, doi: 10.1038/s41598-020-69808-z.

J. Siregar, K. Sebayang, B. Yuliarto, and S. Humaidi, “XRD characterization of Fe3O4-ZnO nanocomposite material by the hydrothermal method,” AIP Conf. Proc., vol. 2221, no. 1, p. 110008, 2020, doi: 10.1063/5.0003210.

Q. U. Ain, U. Rasheed, M. Yaseen, H. Zhang, and Z. Tong, “Superior dye degradation and adsorption capability of polydopamine modified Fe3O4-pillared bentonite composite,” J. Hazard. Mater., vol. 397, p. 122758, 2020, doi: 10.1016/j.jhazmat.2020.122758.

P. Satwikanitya, I. Prasetyo, M. Fahrurrozi, and T. Ariyanto, “Adsorption of ethylene using cobalt oxide-loaded pillared clay,” J. Eng. Technol. Sci., vol. 52, no. 3, pp. 424–435, 2020, doi: 10.5614/j.eng.technol.sci.2020.52.3.9.

M. A. Al-Ghouti and R. S. Al-Absi, “Mechanistic understanding of the adsorption and thermodynamic aspects of cationic methylene blue dye onto cellulosic olive stones biomass from wastewater,” Sci. Rep., vol. 10, no. 1, pp. 1–18, 2020, doi: 10.1038/s41598-020-72996-3.

H. I. Albroomi, M. A. Elsayed, A. Baraka, and M. A. Abdelmaged, “Batch and fixed-bed adsorption of tartrazine azo-dye onto activated carbon prepared from apricot stones,” Appl. Water Sci., vol. 7, no. 4, pp. 2063–2074, 2017, doi: 10.1007/s13201-016-0387-2.

S. Radoor, J. Karayil, J. Parameswaranpillai, and S. Siengchin, “removal of anionic dye congo red from aqueous environment using polyvinyl alcohol/sodium alginate/ZSM-5 zeolite membrane,” Sci. Rep., vol. 10, no. 1, pp. 1–15, 2020, doi: 10.1038/s41598-020-72398-5.

I. J. Idan, L. C. Abdullah, T. S. Y. Choong, and S. N. A. B. M. Jamil, “Equilibrium, kinetics and thermodynamic adsorption studies of acid dyes on adsorbent developed from kenaf core fiber,” Adsorpt. Sci. Technol., vol. 36, no. 1–2, pp. 694–712, 2018, doi: 10.1177/0263617417715532.

W. Huang, J. Chen, F. He, J. Tang, D. Li and Y. Zhu, “Effective phosphate adsorption by Zr/Al-pillared montmorillonite: Insight into equilibrium, kinetics and thermodynamics,” Appl. Clay Sci., vol. 104, pp. 252–260, 2015, doi: 10.1016/j.clay.2014.12.002.

O. Issaoui, H. Ben Amor, M. Ismail, and M. R. Jeday, “Preparation of Al-pillared clay and application of methylene blue adsorption,” Int. Conf. Green Energy Convers. Syst. 2017, pp. 1–4, 2017, doi: 10.1109/GECS.2017.8066219.

R. Huang, L. Zhang, P. Hu, and J. Wang, “Adsorptive removal of congo red from aqueous solutions using crosslinked chitosan and crosslinked chitosan immobilized bentonite,” Int. J. Biol. Macromol., vol. 86, pp. 496–504, 2016, doi: 10.1016/j.ijbiomac.2016.01.083.

B. K. Aziz, D. M. Salh, S. Kaufhold, and P. Bertier, “The high efficiency of anionic dye removal using Ce-Al13/pillared clay from Darbandikhan natural clay,” Molecules, vol. 24, no. 15, pp. 1–15, 2019, doi: 10.3390/molecules24152720.

M. Stjepanović, N. Velić, A. Galić, I. Kosović, T. Jakovljević, and M. Habuda-Stanić, “From waste to biosorbent: Removal of congo red from water by waste wood biomass,” Water, vol. 13, no. 3, 2021, doi: 10.3390/w13030279.

N. S. Sulaiman, M. H. Mohamad Amini, M. Danish, O. Sulaiman, and R. Hashim, “Kinetics, thermodynamics, and isotherms of methylene blue adsorption study onto cassava stem activated carbon,” Water, vol. 13, no. 20. 2021, doi: 10.3390/w13202936.

C. Phawachalotorn and N. Suwanpayak, “The efficiency of mangosteen peel for dye removal,” J. Phys. Conf. Ser., vol. 1719, no. 1, 2021, doi: 10.1088/1742-6596/1719/1/012061.

V. S. Munagapati, V. Yarramuthi, Y. Kim, K. M. Lee, and D. S. Kim, “Removal of anionic dyes (reactive black 5 and congo red) from aqueous solutions using banana peel powder as an adsorbent,” Ecotoxicol. Environ. Saf., vol. 148, pp. 601–607, 2018, doi: 10.1016/j.ecoenv.2017.10.075.

T. H. Nazifa, N. Habba, Salmiati, A. Aris, and T. Hadibarata, “Adsorption of procion red MX-5B and crystal violet dyes from aqueous solution onto corncob activated carbon,” J. Chinese Chem. Soc., vol. 65, no. 2, pp. 259–270, 2018, doi: 10.1002/jccs.201700242.

C. Djelloul, A. Hasseine, and O. Hamdaoui, “Adsorption of cationic dye from aqueous solution by milk thistle seeds: Isotherm, kinetic and thermodynamic studies,” Desalin. Water Treat., vol. 78, pp. 313–320, 2017, doi: 10.5004/dwt.2017.20920.

N. Nasuha and B. H. Hameed, “Adsorption of methylene blue from aqueous solution onto NaOH modified rejected tea,” Chem. Eng. J., vol. 166, no. 2, pp. 783–786, 2011, doi: 10.1016/J.CEJ.2010.11.012




DOI: http://dx.doi.org/10.24845/ijfac.v7.i2.51

Refbacks

  • There are currently no refbacks.


 

Editorial Office:

Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Sriwijaya
Jl. Palembang-Prabumulih Km.35 Indralaya Ogan Ilir Sumatera Selatan 30662

 

 

Creative Commons License
IJFAC by Department of Chemistry, Faculty of Mathematics and Natural Sciences, Universitas Sriwijaya is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License