Hydroxyapatite Coating on Alloys CoCrMo-TiN with Sol-Gel Method

Charlena Charlena, Sulistioso Giat Sukaryo, Moch. Irgham Zuhfria



Hydroxyapatite is synthesized by precipitation-sonification using calcium from field snail shell and powder phosphorus from (NH4)2HPO4. The calcium value was measured by atomic absorption spectrophotometer was 82.82%.The temperatures were varied on 600, 800, and 1000 oC to determine the best temperature of the coating. The best temperature was used to superimpose the HAp on the CoCrMo-TiN metal alloy using the modified sol-gel method. The layer on the metal alloy was identified with x-ray diffraction (XRD) and corrosion test. The XRD result showed that most of the CoCrMo-TiN metal alloy surface was coated by HAp. Beside HAp, there were several other phases such as calcium phosphate, carbonate apatite type A and type B. The best result of the corrosion test was showed in CoCrMo-TiN metal alloy coated with HAp with the smallest corrosion rate 0.0082 mpy.

Keywords: hydroxyapatite, CoCrMo-TiN, precipitation-sonification, sol-gel modified

Full Text:


DOI: http://dx.doi.org/10.24845/ijfac.v1.i3.55


  • There are currently no refbacks.


Editorial Office:

Department of Chemistry, Faculty of Mathematics and Natural Sciences Universitas Sriwijaya
Jl. Palembang-Prabumulih Km.32 Indralaya 30662
Phone: +62-711-580269


Creative Commons License
IJFAC by Department of Chemistry Sriwijaya University is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License